![\"Image\"](\"http:\/\/unilanet.unila.ac.id\/%7Egigih\/\/images\/stories\/picture%209.jpg\")
<\/p>\nNgoprek WLAN PCI Card Atheros di FreeBSD.<\/p>\n
<\/p>\n
device\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 wlan\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # 802.11 support
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 wlan_wep\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # 802.11 WEP support
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 wlan_ccmp\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # 802.11 CCMP support
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 wlan_tkip\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # 802.11 TKIP support
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 an\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # Aironet 4500\/4800 802.11 wireless NICs.
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 ath\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # Atheros pci\/cardbus NIC’s
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 ath_hal\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # Atheros HAL (Hardware Access Layer)
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 ath_rate_sample # SampleRate tx rate control for ath
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 awi\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # BayStack 660 and others
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 ral\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # Ralink Technology RT2500 wireless NICs.
\ndevice\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 wi\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # WaveLAN\/Intersil\/Symbol 802.11 wireless NICs.
\n#device\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 wl\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 # Older non 802.11 Wavelan wireless NIC.<\/p><\/blockquote>\n\n
- Tambahkan statement berikut pada \/boot\/loader.conf<\/li>\n
- radius# more \/boot\/loader.conf
\nloader_logo=”beastiebw”
\nwlan_wep_load=”YES”
\nwlan_tkip_load=”YES”
\nwlan_ccmp_load=”YES”
\nwlan_xauth_load=”YES”
\nwlan_acl_load=”YES”
\nradius#<\/li>\n- Reboott Mesin Anda<\/li>\n<\/ul>\n
<\/p>\n
Setelah di reboot, pastikan kernel telah membaca hardware anda dengan mengetikkan<\/p>\n
\n
- radius#dmesg<\/li>\n<\/ul>\n
Perhatikan Tulisan yang tercetak tebal, menunjukkan hardware sudah dikenali dengan baik<\/p><\/blockquote>\n
Copyright (c) 1992-2006 The FreeBSD Project.
\nCopyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
\nThe Regents of the University of California. All rights reserved.
\nFreeBSD is a registered trademark of The FreeBSD Foundation.
\nFreeBSD 6.2-BETA3 #0: Mon Oct 30 22:15:05 UTC 2006
\n\/\/ <![CDATA[<\/p>\nvar prefix = 'ma' + 'il' + 'to';
\nvar path = 'hr' + 'ef' + '=';
\nvar addy4040 = 'root' + '@';
\naddy4040 = addy4040 + 'opus' + '.' + 'cse' + '.' + 'buffalo' + '.' + 'edu';
\ndocument.write( '‘ );
\ndocument.write( addy4040 );
\ndocument.write( ” );
\n\/\/ ]]>root@opus.cse.buffalo.edu<\/a>
\nThis email address is being protected from spam bots, you need Javascript enabled to view it
\n:\/usr\/obj\/usr\/src\/sys\/SMP
\nACPI APIC Table: <PTLTD\u00a0 Custom\u00a0 >
\nTimecounter “i8254” frequency 1193182 Hz quality 0
\nCPU: Pentium III\/Pentium III Xeon\/Celeron (497.84-MHz 686-class CPU)
\nOrigin = “GenuineIntel”\u00a0 Id = 0x673\u00a0 Stepping = 3
\nFeatures=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
\nreal memory\u00a0 = 268435456 (256 MB)
\navail memory = 252960768 (241 MB)
\nFreeBSD\/SMP: Multiprocessor System Detected: 2 CPUs
\ncpu0 (BSP): APIC ID:\u00a0 1
\ncpu1 (AP): APIC ID:\u00a0 0
\ninphy0:\u00a0 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
\nfxp0: Ethernet address: 00:90:27:95:63:b9<\/p>\nrl0: <D-Link DFE-530TX+ 10\/100BaseTX> port 0x1000-0x10ff mem 0xf4010000-0xf40100ff irq 17 at device 14.0 on pci0
\nmiibus1: <MII bus> on rl0
\nrlphy0: <RealTek internal media interface> on miibus1
\nrlphy0:\u00a0 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
\nrl0: Ethernet address: 00:11:95:63:4e:f9
\nath0: <Atheros 5212> mem 0xf4000000-0xf400ffff irq 16 at device 17.0 on pci0
\nath0: Ethernet address: 00:0f:a3:73:84:9f\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <<<———\u00a0 Device WLAN PCI<\/strong><\/p>\n<\/p>\n
Mustinya setelah masuk ke system anda telah dapat mengkonfigurasi interface WLAN;<\/p>\n
<\/p>\n
radius# ifconfig
\nfxp0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
\noptions=8<VLAN_MTU>
\ninet6 fe80::290:27ff:fe95:63b9%fxp0 prefixlen 64 scopeid 0x1
\ninet 192.168.1.20 netmask 0xffffff00 broadcast 192.168.1.255
\ninet6 3ffe:501:ffff:2::1 prefixlen 64
\ninet6 2001:ffff:0:2::2 prefixlen 64
\nether 00:90:27:95:63:b9
\nmedia: Ethernet autoselect (none)
\nstatus: no carrier
\nrl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
\noptions=8<VLAN_MTU>
\ninet6 fe80::211:95ff:fe63:4ef9%rl0 prefixlen 64 scopeid 0x2
\nether 00:11:95:63:4e:f9
\nmedia: Ethernet autoselect (10baseT\/UTP <full-duplex>)
\nstatus: active
\nath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
\ninet6 fe80::20f:a3ff:fe73:849f%ath0 prefixlen 64 scopeid 0x3
\nether 00:0f:a3:73:84:9f
\nmedia: IEEE 802.11 Wireless Ethernet autoselect (OFDM\/54Mbps)
\nstatus: associated
\nssid UNILANET channel 6 bssid 00:14:bf:bb:96:8b
\nauthmode OPEN privacy OFF txpowmax 36 bmiss 7 protmode CTS burst
\nbintval 100<\/strong>
\nlo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
\ninet6 ::1 prefixlen 128
\ninet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
\ninet 127.0.0.1 netmask 0xff000000
\nbridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
\nether a2:78:77:5a:79:34
\npriority 32768 hellotime 2 fwddelay 15 maxage 20
\nmember: rl0 flags=3<LEARNING,DISCOVER>
\nmember: fxp0 flags=3<LEARNING,DISCOVER>
\nradius#<\/p>\n<\/p>\n
Done<\/p>\n","protected":false},"excerpt":{"rendered":"
Ngoprek WLAN PCI Card Atheros di FreeBSD. Pastikan WLAN PCI Atheros sudah terpasang dengan baik By Default untuk BSD 5.xxx keatas anda sudah tidak perlu konfigurasi ulang Kernel<\/p>\n","protected":false},"author":25,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1348,5],"tags":[],"class_list":["post-114","post","type-post","status-publish","format-standard","hentry","category-kiat-sukses-menjadi-seorang-network-engineer-2","category-old-post-dari-unilanet"],"_links":{"self":[{"href":"https:\/\/dosen.unila.ac.id\/gigih\/wp-json\/wp\/v2\/posts\/114"}],"collection":[{"href":"https:\/\/dosen.unila.ac.id\/gigih\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/dosen.unila.ac.id\/gigih\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/dosen.unila.ac.id\/gigih\/wp-json\/wp\/v2\/users\/25"}],"replies":[{"embeddable":true,"href":"https:\/\/dosen.unila.ac.id\/gigih\/wp-json\/wp\/v2\/comments?post=114"}],"version-history":[{"count":0,"href":"https:\/\/dosen.unila.ac.id\/gigih\/wp-json\/wp\/v2\/posts\/114\/revisions"}],"wp:attachment":[{"href":"https:\/\/dosen.unila.ac.id\/gigih\/wp-json\/wp\/v2\/media?parent=114"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/dosen.unila.ac.id\/gigih\/wp-json\/wp\/v2\/categories?post=114"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/dosen.unila.ac.id\/gigih\/wp-json\/wp\/v2\/tags?post=114"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}